Ceramic on ceramic hip resurfacing

Ceramic on Ceramic Hip Resurfacing — OrthopaedicPrinciples

Ceramic-on-Ceramic (CoC) Hip Resurfacing System

  1. Ceramic-on-ceramic HRA Systems Due to very high fracture strength, toughness and wear resistance, BIOLOX ® delta appears well-suited for use in hip resurfacing. Thin-walled ReCerf ® acetabular cups made of this material have shown very high resistance to critical impact loads in a laboratory study under extreme conditions. All components passed a lateral fall simulated impact test without.
  2. A small number of surgeons are using Ceramic on Ceramic Hip Resurfacing Devices. Most are using the ReCerf ceramic on ceramic device and Professor Cobb is using the H1. This is a listing the the surgeons I know are currently using ceramic on ceramic device
  3. The H1 ® (Embody Ltd.) and the ReCerf ® (MatOrtho Ltd.) ceramic hip resurfacing devices are both undergoing Clinical Investigations approved by the UK Health Research Authority. Simultaneously the use of large head ceramic bearing couples in more traditional hip arthroplasty surgery has continued with sound clinical results
  4. Ceramic on Ceramic Hip #Resurfacing. Courtesy: Prof Justin Cobb, Imperial College, London, UK. Justin is the Chair of Orthopaedics at Imperial college, where he runs the MSk Lab, in the Sir Michael Uren Biomedical Engineering Hub - 12 floors of clinicians engineers and scientists
  5. Ceramic-on-ceramic hip replacements fulfill this need, providing a longer-lasting implant using stronger materials than cobalt-chrome and polyethylene. These ceramic-based materials have demonstrated significantly lower wear than a metal-on-metal hip solution because of the durability of ceramics versus traditional metal hip replacements

The ceramic resurfacing prosthesis enables bone-preserving endoprosthetic reconstruction of the hip joint, explains Project Manager Martina Johannes of Fraunhofer IKTS at the Hermsdorf location Hip replacement surgery replaces part of the hip joint called the ball-and-socket with artificial materials. Metal, plastic, and ceramic can all be used to replace the hip joint. Ceramic is a high. Post Update 08.07.21. CeramTec has just issued their latest CeraNews which is dedicated to Ceramic Resurfacing. Amongst other updates, Consultant Orthopaedic Surgeon, Mr Andrew Manktelow, offers insight into his experience with Hip Resurfacing and shares how the practice, along with the development of new technology (ReCerf) is addressing a clinical need Disadvantages of ceramic hip replacement systems include the potential for the material to fracture, the expense and noise. Although the ceramics used are extremely hard and durable, like diamond, they are brittle. The ceramic-on-ceramic systems present the greatest risk for fracture. If the system fractures, pieces of broken ceramic can embed.

ReCerf is a new type of ceramic on ceramic hip resurfacing device. The traditional standard hip resurfacing device is metal on metal like the BHR , Birmingham Hip Resurfacing Device, the Wright C+ and Biomet. New types of devices are being developed which will be used with all good candidates, even women and small men Ceramic on Ceramic Recerf • Manufactured by MatOrtho Limited United Kingdom • Minimal bone removal compared to total hip • Ball-and-socket bearing with same size as the natural hip joint • Less dislocation as with total hip, retaining the healthy femoral head • No exposure to metal debris and metal ions, minimal risk for allerg OPN: Back in 2010 you ruled outPolyethylene as a suitable material for use in Hip Resurfacing, you stated, andI quote directly from the article here; Ceramic-on-ceramic was a non-starter;the components were too thick for a conservative arthroplasty and brittleness and fracture was an issue. Polyethylene had been tried but the volumetric wear. By Prof Justin Cobb, Imperial College, LondonJustin is the Chair of Orthopaedics at Imperial college, where he runs the MSk Lab, in the Sir Michael Uren B.. Facts About Ceramic Hip Replacement Surgery. Jonathan Cluett, MD, is a board-certified orthopedic surgeon with subspecialty training in sports medicine and arthroscopic surgery. Stuart Hershman, MD, is a board-certified spine surgeon. He specializes in spinal deformity and complex spinal reconstruction

CERAMIC-ON-CERAMIC HIP RESURFACING. In THR, ceramic-on-ceramic (CoC) bearings have a 45-year clinical history of favorable wear. However, this success is offset by a greater risk of implant fracture. The rate of femoral head fracture has decreased by using BIOLOX®delta ceramic implant (CeramTec GmbH, Plochingen, Germany) Background: The use of Ceramic-on-Ceramic (CoC) bearings in primary total hip arthroplasty (THA) is increasing and has been intensively analysed. This bearing plays a particularly relevant role in young, active patients and shows advantages over other bearings in biocompatibility, wear rate and lubrication properties This is a prospective, non-randomized, consecutive series, multicentre, observational study to evaluate the clinical outcome of ceramic-on- ceramic hip resurfacing arthroplasty using the ceramic, non-porous, non-cemented H1 Hip Resurfacing Arthroplasty. It includes a safety study followed by an efficacy study The history of ceramics in resurfacing. A variety of materials have been used in resurfacing including early generation ceramics. Table 1 describes some of the earliest hip resurfacing devices which utilised alumina ceramic. The majority of these devices only used ceramic in the femoral side and many early devices had the limitation of a polyethylene acetabular cup Developed at Imperial College London, the experimental H1 hip resurfacing implant is designed to get around these shortcomings. It's made out of a strong, low wearing and non-toxic ceramic that.

Ceramic on Ceramic Hip Resurfacing Surgeons - Hip

We hope this means the advantages of hip resurfacing are kept, while the possibility of problems from using metal are lost. The ceramic hip could last more than 20 years Hip resurfacing is a type of surgery to replace a damaged hip joint. In the hip joint, the rounded head of the thighbone (the femoral head) moves smoothly inside the round socket of the hip bone. Normally, the socket is lined with cartilage, which helps the bones move smoothly. When there is damage to this joint, moving the femoral head may. If a ceramic-on-ceramic bearing could be used for hip resurfacing it would offer the benefit of reduced metal release 3., 4. and circumvent adverse reactions to metal debris (ARMD), a phenomenon which has adversely affected the number of bone conservative arthroplasties performed in recent years [5]

Case Report: ReCerf® ceramic-on-cerami

  1. A novel Ceramic-on-Ceramic hip resurfacing implant offers a bone conserving treatment for young and/or active patients without the metal ion related issues associated with current Metal-on-Metal (MoM) hip resurfacing devices. BIOLOX delta ceramics are currently used as bearing surfaces in total hip replacement and have shown to be low wearing.
  2. gs in patients who would like to be active and whose age is such that they would outlive.
  3. Ceramic hip resurfacing is similar in design to traditional metal hip resurfacing however the implant is manufactured from the ceramic commonly used in many conventional total hip replacements. This information has been written by A/Prof Patrick Weinrauch for the purposes of patient education. The details provided are of general nature only and.
  4. Unlike other hip resurfacing, the H1 implant is made of ceramic that is strong, low wearing and non-toxic. The researchers believe that by swapping the metal material with ceramic, the advantages of hip resurfacing surgery are kept, while the possibility of problems arising from the metal ions released is removed
  5. Professor Cobb added: The H1 hip resurfacing implant is made from ceramic and designed to fit the contours of both male and female hips, so may avoid the problems seen with metal hip resurfacing. The ceramic used in the H1 is the same material used for the ball head in most hip replacements in the world today. The early results are promising.
  6. a ceramic insert (socket liner), an alu
  7. Hip resurfacing is an effective procedure, enabling higher levels of activity in younger people. Issues with high levels of cobalt and chromium ions in some brands of this device have led to a... Early Experience with Ceramic-on-Ceramic Resurfacing | SpringerLin

A hip implant consists of 4 components: acetabular cup, femoral stem, articular liner and femoral head. As an ideal material for THR, ceramic possesses excellent biocompatibility and stability in the human bodies. Moreover, ceramic-on-ceramic interface is highly wear-resistant, preventing generation of wear particles The longest follow-up reported with ceramic-on-ceramic bearing is 18.5 years [5], including different designs of implants: cemented, uncemented and hybrid implants. How long does a ceramic hip replacement last? We hope this means the advantages of hip resurfacing are kept, while the possibility of problems from using metal are lost a ceramic femoral head and a ceramic lining (ceramic on ceramic) In addition during June 2011 the FDA approved a new ceramic on metal system. Following the massive Depuy recall of metal-on-metal hip implants ceramic hips are fast becoming the implant of choice. In case your imagining that your hip will be made of some sort of pottery let me. The choice between ceramic-on-ceramic (COC) and ceramic-on-polyethylene (COP) in primary total hip arthroplasty (THA) remains controversial. The purpose of this study was to evaluate the reliability and durability of COC vs COP bearing surfaces in THA We present a unique case of a symptomatic adverse local tissue reaction in a patient with a ceramic-on-ceramic total hip bearing surface. To our knowledge, this pathological finding has not yet been described in a ceramic-on-ceramic articulation without a cobalt-chromium alloy trunnion or modular neck component as a source of metal wear. We conclude that despite its mechanical mostly benign.

Ceramic on Ceramic Hip Resurfacing — OrthopaedicPrinciples

  1. Sedel presented an overview of ceramic-on-ceramic hip bearings and a 20-year study on the coupling at the SICOT XXV Triennial World Congress 2011. The advantages of ceramic-on-ceramic are great.
  2. ating metal ion release. Thin-walled ceramic resurfacing heads are conceivable.
  3. Finite Element Analysis of the Contact Mechanics of Ceramic-on-Ceramic Hip Resurfacing Prostheses. Ahmet Cilingir. Related Papers. Lubrication and wear modelling of artificial hip joints. By James Ho Loong. Contact mechanics of modular metal-on-polyethylene total hip replacement under adverse edge loading conditions
  4. Professor Cobb added: The H1 hip resurfacing implant is made from ceramic and designed to fit the contours of both male and female hips, so may avoid the problems seen with metal hip resurfacing
  5. Ceramic-on-Ceramic Hip Implants Squeak Only When Dry [Worn Ceramic-on-Ceramic Hip Implants Squeak Only When Dry] By Ira Tibbitts - August Continue reading → Should I Be Concerned if My Hip Replacement Squeaks? August 4, 201
  6. One hundred three ceramic-on-ceramic total hip arthroplasties in 97 patients were retrospectively reviewed. Average follow-up was 50.4 months. Preoperative Harris Hip Score was 49.5 points, which.
  7. gham Hip Resurfacing Femoral System in June 2015, and its Modular SMF Hip Stem and Modular REDAPT Revision Femoral System as recently as November 2016

However, any squeaking should be reported to, and evaluated by, your doctor. Especially with ceramic hip replacements, there are reports of rare cases of squeaking being an early sign of an implant problem. 10 . If the squeaking is determined not to be a problem with the implant, and the noise is tolerable, the problem is usually left alone The hip resurfacing prosthesis currently used in surgeries is made from an alloy consisting of cobalt, chromium and molybdenum. But this metal is not tolerated well by all patients, some of whom develop allergic reactions or infections. In some cases, the prosthesis may even need to be removed. Through the Ceramic Bonepreserver project, Fraunhofer Institute for Ceramic Technologies and Systems.

Ceramic Hip Replacements Steven Harwin, MD - New York

Comparing the cup deformation following implantation of a novel ceramic-on-ceramic hip resurfacing bearing to a metal standard in a cadaveric model. Adam James Farrier, Lauren Moore, Will Manning, Carolina Avila, Simon N Collins, and James Holland Rosemarie K's Hip Resurfacing with Dr. De Smet 2017 → Dr. De Smet Discusses ReCerf Ceramic on Ceramic Hip Resurfacing Hip Resurfacing and Total Hip Replacement at Hips for You Posted on April 30, 2019 by pwalter April 30, 201 However, ceramic-on-ceramic are also considered, as are metal-on-metal bearings in hip resurfacing surgeries. Metal-on-metal bearings Early problems. Metal-on-metal bearings were among the first to be used in total hip arthroplasty and found clinical success in the 1960s and 1970s Research summary. This study will document the safety and efficacy of a novel ceramic-on-ceramic hip resurfacing prosthesis, called H1, as a treatment of end-stage hip osteoarthritis. When performing a hip resurfacing, the surgeon only removes the diseased cartilage of the hip joint and replaces it with a prosthesis that re-covers the articular.

Hip Resurfacing, sometimes called Birmingham Hip Replacement is an surgical treatment options for patients with hip arthritis. In hip resurfacing, the arthritic femoral head (i.e the ball part of the hip joint) is not removed. Instead, the femoral head is capped or resurfaced with a thin artificial surface prosthesis Hip resurfacing can provide excellent outcomes in properly selected patients when accurate technique and a well-designed implant are used. In the absence of one or more of these factors, metallosis may occur. Resurfacing allows full activity to be restored for the younger, active patient, and revision options are favorable.. Comparison of hip resurfacing patients with ceramic-on-ceramic total hip replacement patients ; The collaborative orthopaedic registry - ongoing data collection on arthroplasty patients ; Results of hip resurfacing: early results using 3 different implants ; Early range of motion following hip resurfacing surger

A ceramic resurfacing prosthesis for hip joint

  1. This systematic review of the literature summarises the clinical experience with ceramic-on-ceramic hip bearings over the past 40 years and discusses the concerns that exist in relation to the bearing combination. Loosening, fracture, liner chipping on insertion, liner canting and dissociation, edge-loading and squeaking have all been reported, and the relationship between these issues and.
  2. Ceramic on Ceramic. Metal on Metal. These bearings were developed to allow younger patients to have hip replacements as they may last longer than traditional metal on plastic bearings and hopefully last a lifetime. Ceramic on Ceramic. The ceramic ‐ ceramic bearings have been around for over 20 years
  3. Comparison study of temperature and deformation changes in the femoral component of a novel ceramic-on-ceramic hip resurfacing bearing to a metal standard, using a cadaveric model. Adam James Farrier, Lauren Moore, Will Manning, Carolina Avila, Simon N Collins, and James Holland
  4. Home - Dr. James W. Pritchet
  5. Description: Dr. Pritchett describes and demonstrates cement less ceramic polyethylene hip resurfacing. This is a sports hip
  6. More recently, a ceramic on ceramic Hip resurfacing has been developed and become available for the management of advanced hip osteoarthritis. These implants have only been in clinical use in well controlled research centres since 2018 therefore the long term clinical results are not yet known and these implants are not on general release
  7. An important update was delivered by Prof Justin Cobb, the principle inventor of the H1 Ceramic on Ceramic Hip Resurfacing concept. During his presentation Prof Cobb shared the current results of the safety study, where he was able to comment on the additional CT based RSA analysis of these early implantations

What To Expect from a Ceramic Hip Replacemen

  1. Professor McMinn says, MoM bearings will eventually be abandoned in favour of more modern bearing materials. My colleague Professor Justin Cobb, at Imperial College London, is the leading proponent of ceramic on ceramic bearings for hip resurfacing and his design is currently in Clinical Investigation
  2. A sub-type of a polyethylene hip is made with a newer plastic called cross linked polyethylene, which is more durable. Ceramic on Metal (COM), Ceramic on Ceramic (COC), Ceramic on Polyethylene (COP) - Ceramic hips are made of specialized and more durable versions of the same type of material that plates and bowls are made from. There are.
  3. Hip Resurfacing in the United States. The concept of hip resurfacing was started in the United States in the 1970's by Dr. Harlan Amstutz, as a way to save bone in younger patients during the treatment of hip arthritis. Dr. Amstutz had realized that traditional total hip replacement, while having a good lifespan in older patients, tended to.
  4. gham hip system is the grinding of metal against metal, which leads to the accumulation of tiny particles of metal around the joint. Over time, these particles irritate the hip.
  5. ed by micrograms per liter of blood. If a patient has between 1-5 micrograms per liter, he might experience heart and memory issues. If there are more than 7, the patient might feel hip pain and.
  6. Unlike other hip resurfacings, the H1 implant is made of ceramic that is strong, low wearing and non-toxic. The researchers believe that by swapping the metal material with ceramic, the advantages of hip resurfacing surgery are kept, while the possibility of problems arising from the metal ions released is removed

ReCerf® Ceramic Hip Resurfacing - MatOrth

The newer, large head ceramic on ceramic hip devices offer a person much more of a very active life style than the older, small metal and plastic hip devices. Hips for You is a website all about total hip replacement. Two Types of Hip Resurfacing. There are two types of Hip Resurfacing: a partial (hemi) hip resurfacing or a complete hip. CoC: cERAMIC oN CERAMIC. The vast majority of placed prostheses in the world are Total Hip Prostheses. (99%) We place a titanium ingrowth prosthesis, so it has to grow into the bone. The frictional torque between the two components is Ceramic on Ceramic (=CoC) - No allergy to titanium or ceramics - Very wear resistan

What are the Pros and Cons of a Ceramic Hip Replacement

Hip Resurfacing Arthroplasty is indicated in the physiologic younger patient 30-60 years old who has osteoarthritis and wishes to maintain an active lifestyle. It is a more bone conservative surgery and maintains an anatomic feeling hip compared to a standard Total Hip Replacement Ceramic on ceramic (CoC) bearings in hip replacement were developed by Boutin, Griss and Mittelmeier in the early 1970's in France and Germany and the earliest designs consisted of a bulk alumina acetabular cup that was fixed in the acetabulum either by cement or with a press-fit. 1- We report the early failure of five ceramic-on-ceramic hip resurfacings (CoCHRs). The ceramic used for the acetabular liner was a novel ceramic-composite (two thirds polyurethane and one third alumina ceramic). All cases were revised for increasing metal ion levels (blood cobalt 3.93-208. μg/l and chromium 1.57-17.5 μg/l) due to ceramic liner fracture and/or accelerated wear of the ceramic. Failure of a Ceramic-on-Ceramic Hip Resurfacing Due to Metallosis: A Case Report. Atrey A, Waite J, Hart A, Meswania J, Morison Z, Carr R, Young SK. JBJS Case Connect, 4(1 suppl 9):1-6, 01 Mar 2014 Cited by: 0 articles | PMID: 2925251

ReCerf Ceramic Hip Resurfacing Device - Hip Resurfacing at

A look ahead to the future of hip replacement and hip

The occurrence of ceramic liner fracture is reported to be between 0,013% [ 53. J. A. D'Antonio and K. Sutton, Ceramic materials as bearing surfaces for total hip arthroplasty, Journal of the American Academy of Orthopaedic Surgeons, vol. 17, no. 2, pp. 63-68, 2009. View at: Google Scholar Hip resurfacing uses thin-walled shells instead of large metal stems - the traditional approach which can result in more bone loss during fitting. Another innovation in the project, according to Dr Taylor, has been achieved in the way the prosthesis is mechanically attached to the bone without cement:. Unlike traditional hip replacement, hip resurfacing doesn't completely replace the ball of the hip with a metal or ceramic ball. Instead, the bone is reshaped and capped with a metal prosthesis. The hip socket is fitted with a metal cup. As these metal surfaces rub together, there is the potential for wear and release of metal ions Results are based on an ASA grade of 2. 7-year revision rates cannot be estimated for the Corail Pinnacle ceramic-on-ceramic 36 mm because this brand has only been used in England and Wales since 2005. BHR=Birmingham Hip Resurfacing system. ASA=American Society of Anesthesiologists Ceramic-on-Ceramic Hip Information Ceramic Materials Offer the Potential for a Longer-Lasting Hip Replacement . Conventional hip replacement systems use an insert made of plastic and a head made of metal. Over time, these components may wear as the parts move back and forth with normal joint use

Ceramic-on-ceramic bearing surfaces may increase risk of

During the same period, another 21 patients (26 hips) with DDH secondary to osteoarthritis were treated with ceramic-on-ceramic total hip arthroplasty (THA). Average patient age at the time of surgery was 48.2 years (range of 38 to 64 years). At follow-up, no complications (e.g., dislocation, infection, or symptomatic deep venous thrombosis. Hip resurfacing is an alternative form of hip arthroplasty that conserves proximal femoral bone. In the future, ceramic-on-ceramic resurfacing may offer better wear properties and address the issues of metallosis and metal hypersensitivity. Next: Indications 1.1. History. Since its first application, the development of design and materials of hip prosthesis continuously progressed. Its development is one of the most challenging issues of the century in the field of implant technology [].Several materials were used for this scope: glass, polymers, metal alloys, ceramics, composites, etc., trying to combine biocompatibility and fatigue resistance. The extreme hardness of this type of ceramic offers greater scratch resistance than the conventional implants used in conventional hip replacements.1Ceramic-on-ceramic surfaces have demonstrated significantly lower wear versus conventional plastic-on-metal hip systems in the laboratory.2 Therefore, it is anticipated that these improved wear. The ADEPT ® Hip Resurfacing System is provided to meet the demands of patients who are likely to outlive or outperform a traditional total hip replacement.. The ADEPT ® Hip Resurfacing System evolved from the BHR, with the knowledge and experience gained by Finsbury (now MatOrtho ®) from direct involvement in the development of the BHR, as the original manufacturing specialists of.

The first 250 patients (mean age, 49.54 years) of a series of 930 resurfacing arthroplasties were compared clinically and functionally with a series of 190 patients (mean age, 46.76 years) with ceramic-on-ceramic uncemented total hip prostheses. The total Harris hip score was 97.9 in the resurfacing group vs 92.1 in the ceramic group Hip resurfacing involves a replacement of the joint's articular surface only. A total hip replacement, or arthroplasty, on the other hand, involves surgical removal of the neck of the femur (thighbone) and insertion of a stem deep inside the bone to connect with the pelvic socket and liner

Photograph of the ADEPT® Metal-on-Metal Hip Resurfacing

1.2 This guide applies to the acetabular and femoral articulating components of hard-on-hard hip replacement devices. Acetabular components can be monoblock, or a modular component with a separate acetabular shell and acetabular liner. As stated above, articulating components have been made from Co28Cr6Mo for a metal-on-metal bearing; high purity alumina or alumina matrix composite ceramics. Ceramic on ceramic hip prostheses are an increasingly popular choice for hip replacement. Modern manufacturing techniques and developments have increased the strength and reliability of ceramic materials. The alternative bearing couples such as metal-on-polyethylene and metal-on-metal are more inclined to wear and produce particulate debris. Despite reports of fractures and stripe wear, harder. 1) unilateral MoM hip resurfacing, 2) bilateral MoM hip resurfacing, 3) metal on polyethylene THA, and. 4) ceramic on ceramic THA. Both Chromium and cobalt ion levels the highest for both MoM.

Ceramic on Ceramic Hip Resurfacing - YouTub

Metal-on-metal hip implants have the same adverse effects as other types of hip implants, including infection, loosening, bone loss, device or bone fracture, and joint dislocation. In addition. Hip Resurfacing. Hip resurfacing is similar to total hip replacement, except that the top of the femur is capped with a spherical surface (sort of like capping a tooth) rather than cutting off the ball and placing a stem into the femur. Otherwise, the ball moves within an artificial hip socket similar to a hip replacement. Hip resurfacing conserves bone and is a less-invasive procedure than.

Facts About Ceramic Hip Replacement Surger

Hip resurfacing is an alternative to total hip replacement surgery where both the ball and socket of the hip joint are completely removed and replaced with plastic, metal, or ceramic prosthetics. Click here to watch hip resurfacing surgery video offered by Dr. Brighton in Sydney, Australia The DePuy ASR XL Acetabular System and ASR Hip Resurfacing System were used in more than 93,000 hip replacement surgeries internationally. Both systems were members of a class of large-diameter hip resurfacing and replacement devices created from a single sheet of metal. The metal-on-metal systems were designed to be more durable than other.


1.FUNCTION: Hip resurfacing creates the most normal artificial hip joint possible. This is most important for the athletic person who wants to return to impact sports or who wants to do heavy physical work. But even at fast walking speeds hip resurfacing gait is more normal than gait with a total hip replacement We required the reporting of survival of a specific implant, brand, or construct with a mean or median follow-up of greater than 15 years. We excluded articles reviewing specifically complex primary total hip replacement, revision, or hip resurfacing, because these procedures have different survivorship

DePuy Pinnacle Hip Implant Lawsuits

HIP RESURFACING SURVIVORSHIP, 2480 CASES OVER 10 YEARS. Dr. Gross has now performed over 2500 Hip Surface Replacement (HSR) procedures over the last 12 years. Most failures occur during the first 6 months of the healing period. However, there is a slow rate of failure that occurs over time Hip resurfacing is considered by most to be a more challenging operation for the surgeon than THA and requires specialized training and a significant learning curve. (ceramic on ceramic. At the other end of the spectrum from metal-on-metal implants are ceramic-on-ceramic hip systems. If you put ceramic-on-ceramic together, because you've got two hard surfaces against each other, you get extremely low wear rates, says Steven Hughes, orthopedic product manager for C5 Medical Werks (Grand Junction, CO; www.c5medicalwerks.com) The belgian hip-clinic Anca Medical Center has special expertise and skills in total hip, hip resurfacing, sports- and trauma surgery. The belgian Hip-Clinic (Anca Medical Center, or AMC-Ghent) earned an international reputation for its expertise and skills in total hip, hip resurfacing, sports- and trauma surgery. Many young and active patients, and athletes from around the world, has found.

Ceramic-on-Ceramic in Total Hip Replacement Revisio

A Finite Element (FE) study was performed to investigate the contact mechanics and stress distribution of Ceramic-on-Ceramic (COC) hip resurfacing prostheses. It was focused in particular on a parametric study to examine the effects of radial clearance, loading, alumina coating on the implants, bone quality, and fixation of cup-bone interface Brian flew to South Africa to have a ReCerf Ceramic on Ceramic hip resurfacing with Dr. De Smet, one of the most experienced hip resurfacing surgeons in the world. Hip-Clinic Anca Medical Center. July 14, 2019 · My international patients from July 2019. Hip-Clinic Anca Medical Center Metal resurfacing systems involves a trimmed femoral head crowned with a metal covering. Any damaged bone and cartilage within the socket are removed and replaced with this system. Ceramic Hip Implants. The newest development in orthopedic implants for hip replacement surgery is the addition of ceramic-on-ceramic implants

Partial Hip Replacement | Clinic of Braunschweig - TopChoice of implant combinations in total hip replacement